|
LP-35
- Heaviest Loads
- 4-Leaf Stack
- 3500 lbs. Level Load Capacity
- Available in Progressive or Constant Rate
- Offers the Maximum in Carrying Capacity
- Recommended for 3/4 Ton and 1 Ton Applications
- Mounting kit sold seperately
|
|
|
LP-25
- Heavy Loads
- 3-Leaf Stack
- 2500 lbs. Level Load Capacity
- Progressive Rate Design is Fully Adjustable
- Design can handle the load 24/7
- Mounting kit sold seperately
|
|
|
|
|
This Hellwig Helper Spring set the standard for all other aftermarket helper springs. Featuring Progressive Spring Rate and Fulltime Spring Rate design, this spring is the workhorse of the Hellwig Spring line. With the Progressive design the vehicle must be loaded and its spring compressed to activate the Hellwig Spring, therefore as the vehicles load increases the Hellwig Helper Spring progressively increases its resistance to the load. In the Fulltime design the Hellwig Spring immediately reacts to the vehicles load, therefore compressing very little as load is applied to the vehicle. Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturer’s Gross Vehicle Weight Rating. Designed to install on full size pick-up trucks and vans, this unit fits vehicles with leaf spring widths of 2.5” or 3”. These units come complete with plated and powder coated components and all the necessary hardware and installation instruction make the job easy. When ordering be sure to identify the spring kit and the appropriate hardware kit to complete the installation. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. “Set it and forget it”. The LP 25 is rated at 2500lbs level load carrying capacity and the LP 35 is rated at 3500lbs level load carrying capacity, not exceed the vehicles Gross Vehicle Weight Rating.
|
LP-15
- Medium Duty Loads
- 1500 lbs. Level Load Capacity
- Available in Progressive & Constant Rate
- Factory ride is unaffected when vehicle is unloaded
- Includes all mounting hardware in one box
|
|
This helper spring line fits the Mid-size and Small pick-up groups. Manufactured with heat treated ASTM 5150 alloy spring steel in our California based facility, these units increase your vehicles level load carrying capacity up to the manufacturer’s Gross Vehicle Weight Rating. Featuring heavy duty components and easy to read installation instructions this helper spring line-up does a lot of work for its size. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. “Set it and forget it”. With its Progressive Spring Rate this helper spring automatically adjusts its spring rate to the load applied to the vehicle. For example, with the Progressive design the vehicle must be loaded and its spring compressed to activate the Hellwig spring, therefore as the vehicles load increases the Hellwig helper spring progressively increases its resistance to the load. Packaged in one kit this unit comes complete with plated and powder coated components, spring leaves, heavy duty hardware and installation instructions to make this unit easy to install and use. Fine tune your vehicles leaf spring suspension to suit your particular needs adjusting the heavy duty u-bolts provided. If your tow and haul needs change, simply adjust the heavy duty u-bolts to suit the new requirement. Once installed and adjusted you are free to haul and or tow a multitude of equipment and commodities with greater control and stability.
application lookup
|
