Kenworth Conversion Kit 52" Axle
One kit does both axles. Everything you need to convert your truck to the AG-400 design comes in this kit.
2 Torsion Bars
4 Bolts, 4 Nuts, 4 Washers
4 Poly Center Torsion Bar Bushings
4 Collar Assembly
To figure out the axle spacing, measure from center of hub to center of hub on rear tandems, on same side
KEEP IN MIND WHEN ORDERING THAT THIS IS DELIVERED ON A PALLET AND WEIGHTS 250 LB. YOU WILL NEED A FORKLIFT OR YOU WILL HAVE TO TAKE OFF FREIGHT TRUCK BY HAND, EACH BAR IS 100 LB. FREE SHIPPING IS BUSINESS TO BUSINESS. IF YOU ARE IN A RESIDENTIAL AREA THERE WILL BE A $75.00 DELIVERY CHARGE.
C65-1000, 334-1794, sw59-29000-kit
Note: Free Shipping only apply to the 48 contiguous states.