Home > HITCH AND COUPLING > TRAILER ACCESSORIES > D-RINGS

D-RINGS

D-Rings

Swivel D-Ring

Part #	Description	Max Capacity		Wt.
Part #	Description	S.W.L.	M.B.S.	Wt.
2330229D	D-Ring and Assembly	15,000	-	8
2330229	Assembly Only NO D-RING	15,000	-	4

Bent D-Ring

D-Ring bent at 50 degree angle

Part #	Model	Max Capacity		Clip Style	Wt.
		S.W.L.	M.B.S.
2330223	1" 5"x6"	15,000	47,000	A or B	5

Forged D-Rings

All D-Rings Clips are weldable. All D-Rings and Clips can be forged in Canton, Ohio-if this is desired please note on order. This is subject to different lead times.

Part #	Model	Dimensions			Clip Style	Max. Capacity		Wt.
Part #	Model	A	B	C	Clip Style	S.W.L.	M.B.S.	Wt.
2330226	3/8" D-Ring	3/8"	2-5/8"	2"	A	3,000	-	0.5
2327219*	1/2" D-Ring	1/2"	2-1/4"	2-1/2"	A or B	4,000	12,000	1
2328220	5/8" D-Ring	5/8"	3"	3"	A or B	6,000	19,000	2
2022167	5/8" D-Ring	5/8"	2-3/4"	3-1/2"	A or B	6,000	19,000	2.25
2022168	3/4" D-Ring	3/4"	3"	3"	A	9,000	27,000	4.25
2329221	1" D-Ring	1"	3"	3"	A or B	15,000	47,000	4.5
2330222	1" D-Ring	1"	3"	4"	A or B	15,000	47,000	5

*B-Clip for ½" D-Ring has two ½" square holes for mounting.

TO AVOID INJURY – PLEASE READ CAREFULLY

For all products: To prevent injury or vertical damage, the mounting location must be at least capable of supporting 15% more than the maximum amount to be pulled. Installation: Consult Department of Transportation regulations for procedure.

D-Rings are not to be used for lifting, they are strictly for securing loads.

SAFE WORK LOAD LIMIT (S.W.L.) – The maximum load in pounds which should ever be applied. Working load limit applies to a new product and assumes that the load is applied with even tension.

MAXIMUM BREAK STRENGTH (M.B.S.)– The maximum force in pounds at which the product, in the condition it leaves the factory, has been found by testing to break. This is for acceptance purposes only and the SAFE WORK LOAD LIMIT is still the greatest load that should ever be applied