Kenworth Conversion Kit 54" Axle
One kit does both axles. Everything you need to convert your truck to the AG-400 design comes in this kit.
| 2 Torsion Bars |
| 4 Bolts, 4 Nuts, 4 Washers |
| 4 Center Torsion Bar Bushings |
| 4 Collar Assembly |
To figure out the axle spacing, measure from center hub to center of hub on rear tandems on same side.
C651001, 334-1795
Note: Free Shipping only apply to the 48 contiguous states.
