Mack Trunnion Stand - Standard Trapezoid Bolt Pattern
Used on Mack SS44/ SWS57 Camelback suspensions with 4" wide springs and 3-1/2 diameter shaft.
Bronze Bushing Application, Accomidates the 32 1/4 inside to inside frame rail
Includes Trunnion Shaft 3.5
Note, This Kit has 1.0 inch Frame Holes If OEM is 7/8 inch
Chassis Reaming may be Required for Use of 1.0 inch Bolting
06530, 97QL585, 97QL5122, 97QL5122P2, 97QL5100, 97QL522P3, 97QL555AP2, 97QL555AP4, 97QL584, 97QL585, 97QL555P4, M1211, 339-349, 25120729
IF DELEVERING INTO RESIDENTIAL AREA FREIGHT COMPANY REQUIRES LIFT GATE SERVICE AND THERE IS AN ADDITIONAL CHARGE FOR LIFT GATE OF 250.00 ON TOP OF THE SHIPPING CHARGES, NO EXCEPTIONS
