Home > HITCH AND COUPLING > COUPLING PRODUCTS > TOW RINGS

TOW RINGS

Tow Rings

Trailer Nose Plates

Weldable

Plates allow for 3 different positions. Predrilled nose plates must be reinforced to meet capacity.

Part #	Model	Description	Hole Size (A)	Plate Thickness (B)	Wt.
TNP7165	3/4" Nose Plate	Use for R-48-A, R-49-A, R-50-A	21/32"	3/4"	24
TNP16100	1" Nose Plate	Use for R-50-B, R-51-A	25/32"	1"	32

Adjustable Forged Eye Assemblies

Assemblies include adjustable forged eye, formed steel channel and grade 8 mounting kit. Do not weld forged rings, only the channel. Do not weld forged rings, only channel. Please note Low Vertical Capacity.

Do not overly torque or tighten nuts to try and take the play out. Failure will occur if nuts and bolts are over-torqued.

Part #	Model	Dimensions			Max Capacity		Wt.
Part #	Model	A	B	C	G.T.W	V.L.	Wt.
2373142	3 Position Channel w/ 048 Ring	2-1/2"	1"	8-1/2"	20,000	1,000	19
2375144	5 Position Channel w/ 048 Ring	2-1/2"	1"	12-1/2"	20,000	1,000	23
2374143	3 Position Channel w/ 049 Ring	2-1/2"	1-3/8"	8-1/2"	30,000	2,000	22
2376145	5 Position Channel w/ 049 Ring	2-1/2"	1-3/8"	12-1/2"	30,000	2,000	26
2377303	3 Position Channel w/ 909330 Ring	3"	1-3/8"	8-1/2"	25,000	2,500	22
2377305	5 Position Channel w/ 909330 Ring	3"	1-3/8"	12-1/2"	25,000	2,500	26
2373142E	0-48 Ring Only, No Channel	2-1/2"	1"	N/A	20,000	1,000	8
2374143E	0-49 Ring Only, No Channel	2-1/2"	1-3/8"	N/A	30,000	2,000	10
909330	3" Eye Diameter, No Channel	3"	1-3/8"	N/A	25,000	2,500	11.25

Adjustable Forged Eye Mounting Kits
Part #	Description
2395165	Mounting Kit

LM/SM and Dynaweld© Rings

These rings are not weldable. All these parts include one bolt, washers and a small mounting plate.

Part #	Model	Dimensions					Max Capacity		Wt.
Part #	Model	A	B	C	D	E	G.T.W.	V.L.	Wt.
DM00122		1-1/2"	1-1/2"	2-1/2"	1-1/2"	4-1/2"	30,000	6,000	34
DM01123		2"	2"	3"	1-1/2"	4-1/2"	50,000		42
DM01124		1-1/2"	1-1/2"	3"	1-1/2"	4-1/2"	30,000	6,000	34
2300122	R-51-SM Plate	1-5/8"	1-3/4"	3"	1-5/8"	3-1/2"	30,000	6,000	36
2301123	R-51-LM Plate	1-5/8"	2"	3"	1-5/8"	4-1/2"	60,000		44

LM/SM Mounting Plates

Part #	Model	Description	Wt.
2304205	R-51-SM Plate	15-5/8" height, 5-7/8" width, 1" thick, 3-1/2" center to center hole spacing	26
2305206	R-51-LM Plate	15-5/8" height, 5-7/8" width, 1" thick, 4-1/2" center to center hole spacing	26

Fish Tail Tow Rings

Weldable

Part #	Model	Dimensions				Max Capacity		Wt.
Part #	Model	A	B	C	D	G.T.W	V.L.	Wt.
2069124	0-51 FT	3"	10"	4"	3-3/8"	20,000	4,000	13.25
2069120	0-51 LT	3"	12"	6"	3-7/8"	20,000	4,000	16.5

Dimensions "B" and "C" should only be welded for mounting.

Weldable

Tow Rings

H-51-A

Part #	Model	Dimensions				Max Capacity		Wt.
Part #	Model	A	C	D	Flat Thickness	G.T.W	V.L.	Wt.
2065136	0-48-A	2-1/2"	2-1/2"	1"	5/8"	10,000	1,000	4
2065130	0-49-A	2-1/2"	2"	1-3/8"	1"	10,000	2,000	7
2065135	H-51-A	3"	2-1/2"	1"	5/8"	10,000	1,000	4.5

Dimensions "B" and "C" should only be welded for mounting.

6508 Tow Ring

Weldable

Part #	Model	Max Capacity		Wt.
		G.T.W	V.L.
2065125	6508	15,000	5,000	11

Master Links

Weldable

Part #	Model	Dimensions		Wt.
		Hole Diameter	Ring Thickness
2021143	0-49-B	3"	1-5/8"	9

Bolt-On Drawbars

Do not weld or modify.

Part #

Model

Dimensions

Standard Capacity

Hinged Tongue Capacity

Wt.

G.T.W.

V.L.

G.T.W.

V.L

2065137

0-43-D

2-1/2"

17-1/2"

1-1/4"

20,000

4,000

100,000

500

1111238

0-52-D

17-1/4"

1-5/8"

22,000

4,500

100,000

500

1111245

0-42-D

2-3/8"

17-1/4"

1-5/8"

40,000

8,000

100,000

500

2068133

0-51-E

15"

2-1/2"

1-5/8"

1-1/2"

35,000

7,000

100,000

500

2070131

0-39-D

2-3/4"

15"

1-1/4"

1-1/2

20,000

4,000

100,000

500

2071132

0-39-N

2-3/4"

15"

1-1/4"

N/D

20,000

4,000

100,000

500

16.5

2062129

0-53-D

17-1/4"

3-1/8"

1-5/8"

40,000

8,000

100,000

5000

Wallace Forge recommends replacing all tow rings if there is 1/8" or more of wear to the tow ring.

Swivel Tow Rings

2061127

2063126, 2010455

Part #	Model	Dimensions				Max Capacity		Wt.
Part #	Model	A	B	C	D	G.T.W	V.L.	Wt.
2061127	0-50-A	2-1/2"	1-1/2"	3-1/4"	1-1/2"	20,000	3,000	10
2062128	0-51-B	3"	1-5/8"	4"	2"	50,000	6,500	16.5
2063126	51337	3"	1-5/8"	8-5/8"	2"	50,000	9,000	24
2010455	51337 in Mounting Block	3"	1-5/8"	8-5/8"	2"	50,000	9,000	40

Tow Rings

2067137

2067138

Part #	Description	Max Capacity		Wt.
Part #	Description	G.T.W	V.L.	Wt.
2067137	2-3/8" eye diameter, heat treated, use with 2" sq. tubing or channel	100,000	15,000	11.5
2067138	2-3/8" eye diameter, heat treated, use with 2-1/2" round tubing	100,000	15,000	13
WF862018	2-bolt tow ring, heat treated, 3" eye diameter, use 1-1/4" Gr. 8 bolts, bolt holes spaced 5-1/4" apart on center	60,000	20,000	16

Bolt On Tow Rings

Tow Ring bases are 6"x 6" unless otherwise noted. R-50-A, R-50-B, R-51-A, R-51-B are one piece forging.

Part #	Model	Dimensions						Max Capacity		Wt.
Part #	Model	A	B	C	D	E	F	G.T.W	V.L.	Wt.
2065138	R-48-A	2-1/2"	4-1/2"	21/32"	1"	2-1/4"	5-3/4"	10,000	1,000	11
IQ09330	R-49-A	2-1/2"	4-1/2"	21/32"	1-3/8"	2-1/4"	6-5/8"	42,000	6,000	15
2066134	R-50-A	2-1/2"	4-1/2"	21/32"	1-3/8"	2-1/4"	6-11/16"	48,000	7,000	15
2066138	R-50-B	2-1/2"	4-1/2"	25/32"	1-3/8"	2-1/84	6-11/16"	66,000	19,000	15
2067135	R-51-A	3"	4-1/2"	25/32"	1-5/8"	2-1/4"	6-7/8	66,000	19,000	21
2067136	R-51-B	3"	4-1/2"	57/64"	1-5/8"	2-1/4"	6-7/8	90,000	19,000	21
2067139*	Custom	3"	N/A	N/A	1-1/2"	N/A	6-5/8"	-	-	24

*Minimum hole size for 2067139 is 1/2". Maximum capacity for this Tow Ring depends on hole size.

Tow Ring Mounting Kits
Part #	Description
BK580	5/8" Bolt Kit for R-48-A, R-49-A, R-50-A
BK340	3/4" Bolt Kit for R-50-B, R-51-A

Channels

Gussets are available which provide the channel increased strength.

Part #	Model	Channel Length	Max Capacity	Wt.
Part #	Model	Channel Length	GTW	Wt.
2373142B	3 Position	8 1/2"	30,000	3
2376145B	5 Position	12 1/2"	30,000	5
2376146	3 Position	7 1/2"	16,000	3
2376148	5 Position	11 1/2"	16,000	5
2376140	6 Position	14 1/2"	16,000	6
2376151	7 Position	16 1/2"	16,000	7
2395165	Grade 8 Bolt Kit	-	-	4